MTD 21A-241E700 Manuel de l'opérateur télécharger pdf (Page 6)

Assembly

NOTE: Stand behind

the tiller as if you were

going to operate it. Your

right hand corresponds

to the right side of the

tiller; your left hand

corresponds to the left

side of the tiller.

IMPORTANT

This unit is shipped

without gasoline or oil

in the engine. Fill up

gasoline and oil as

instructed in the accom

panying engine manual

BEFORE operating your

machine.

NOTE: This operator’s

manual may cover

various models of tillers.

The units illustrated

may vary slightly from

your unit. Follow only

those instructions which

pertain to your model

number.

Figure 3-1: Remove hardware from lower handle.

Assembly

1. Remove the star handle knobs and carriage

bolts from the lower handle, Figure 3-1.

2. Position the upper handle onto the lower

handle, Step A Figure 3-2. Align the holes

on lower handle with the holes on the upper

handle (choose the upper or lower holes

depending on the desired handle height).

3. Insert carriage bolts through the holes and se

cure with star knobs, Step B Figure 3-2. Make

certain carriage bolts are seated securely into

one of the two positions provided.

Figure 3-2: Attach and secure upper handle.

4. Insert left end of tine clutch control into the

hole on the left side of the upper handle,

Figure 3-3.

5. Insert the Z-fitting on the clutch cable into

the hole on the tine clutch control. Hook the

“Z” end into the opening from the inside to

the outside as shown in Figure 3-4.

Figure 3-3: Install left side of the tine clutch control.

Figure 3-4: Hook cable into tine clutch control.

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

MTD 21A-241E700 Manuel de l'opérateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Mini-faucheuses MTD 21A-241E700