MTD 27-Ton Manuel de service télécharger pdf (Page 37)

Control valve

12. Hold the straight fitting with a 1” wrench.

See Figure 4.6.

13. Back off the jam nut using a 7/8” wrench.

See Figure 4.6.

14. Unthread the straight fitting and valve from the cylin-

der.

15. Place the control valve in a vise with the straight fit-

ting facing up. See Figure 4.7.

16. Remove the straight fitting.

17. Mark the orientation of the elbow to the valve.

18. Loosen the jam nut on the elbow fitting using a 15/16”

wrench.

Figure 4.6

Straight fitting

Jam nut

Figure 4.7

Elbow fitting

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 71 72

Pas de commentaire

MTD 27-Ton Manuel de service Page 37