MTD 570 Series Manuel de l'opérateur télécharger pdf (Page 10)

Controlsand Features

Cylinder_

,gDislodger

Control Handle

Horizontal

Beam Lock

Assembly

Vertical

Beam Log

Lock Cradle

Light

NOTE:This Operator's Manual covers several models. Log splitter

features may vary by model. Not all features in this manual are

applicable to all log splitter models and the log splitter depicted

may differ from yours.

EngineControls

See the Engine Operator's Manual for the location and function

of the controls on the engine.

BeamLocks

Figure 4=1

TailLight(if equipped)

The tail light's are located on the back of the frame for

transportation and towing purposes.

WARNING! Do not tow faster than 45mph and

check the local, state, and federal requirements

before towing on any public road.

LogDislodger

These two locks are used to secure the beam in the horizontal or

vertical position. The vertical beam lock is located next to the oil

filter. The horizontal beam lock is located on the beam support

latch bracket.

The log dislodger is designed to remove any partially split wood

from the wedge. This may occur while splitting large diameter

wood or freshly cut wood.

Control Handle

The control handle has three positions; Forward, Neutral and

Reverse. See the Operation Section for instructions.

Wedge

The wedge is used to split the wood.

The Control Handle is used to move the wedge up and down to

split wood.

Tongue

The tongue is used to attach to a towing vehicle for

transportation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

MTD 570 Series Manuel de l'opérateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Séparateurs de bûches MTD 570 Series