MTD RM 33 LS Manuel de l'opérateur Page 7

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 24
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 6
Assembly & Set-Up
3
7
Contents of Carton
One Log Splitter One Operator’s Manual One Engine Operator’s Manual
WARNING! Use extreme caution when unpacking
this machine. Some components are very heavy and
will require additional people or mechanical
handling equipment.
NOTE: Your log splitter is shipped with motor oil in the engine.
You MUST check the oil level before operating. Be careful not to
overfill.
NOTE: All references in this manual to the left or right side of the
log splitter are from the operating position only. Exceptions, if
any, will be specified.
Loose Parts In Carton
Reservoir Tank
Engine-Pump Assembly
Wedge, Beam and Cylinder Assembly
Tongue Assembly
Wheels
Beam Support/Latch Bracket
Log Tray Brackets
Fenders
2 Hub Caps
Recommended Tools for Opening Crate
Safety glasses
Leather gloves
Wire cutters
Pry bar
Claw hammer.
Recommended Tools for Assembly
Standard Screw Driver
Standard Socket Set
Adjustable Wrench
Torque Wrench
Pliers
Side Cutters
Rubber Mallet
Assembly
Attaching the Fenders
1. Remove all three self-tapping screws and the flat washer
from one side of the reservoir tank. See Figure 3-1.
Self-Tapping
Screws
Flat Washer
Self-Tapping
Screws
Lock Nut
Figure 3-1
2. Place the fender and the fender bracket up against the
reservoir tank and align with the holes.
NOTE: The fender is pre-assembled to the fender bracket
by a self-tapping screw, flat washer and lock nut at the
factory.
3. Secure the fender bracket to the reservoir tank with two
of the self-tapping screws removed in step one. See Figure
3-1.
4. Secure the front of the fender to the reservoir tank using
the third self-tapping screw and flat washer removed in
step one.
5. Tighten all the hardware.
6. Install the second fender using the instructions above.
Vue de la page 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire