MTD CSV 020 Manuel de l'opérateur télécharger pdf (Page 13)

13Section 6 — Maintenance & adjuStMentS

Removing the Flail Screen

If the discharge area becomes clogged, remove the flail screen

and clean area as follows:

1. Stop the engine. Make certain the chipper/shredder

vacuum has come to a complete stop.

2. Before unclogging the discharge chute, disconnect and

ground the spark plug wire to retaining post.

3. Remove the vacuum bag from the unit as instructed in the

OPERATION section to obtain access to flail screen.

4. Remove self tapping screw on right side of unit that

attaches to the flail screen. See Figure 6-2.

5. Remove hex screw on top of rear housing near mounting

bracket and the flange lock nut that secures flail screen.

See Figure 6-2.

6. Remove and clean the screen by scraping or washing with

water. See Figure 6-3.

7. Reinstall the screen.

Figure 6-2

Figure 6-3

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

MTD CSV 020 Manuel de l'opérateur Page 13