MTD RZT Series Manuel de l'opérateur télécharger pdf (Page 20)

20 se c t i O n 6— Ma i n t e n a n c e & ad j u s t M e n t s



to the battery while the charger is turned on, as it can

cause sparks.

Keep all sources of ignition (cigarettes, matches, 

lighters) away from the battery. The gas generated

during charging can be combustible.

As a further precaution, only charge the battery in a 

well ventilated area.

Always shield eyes and protect skin and clothing 

when working near batteries.



gases. Use extreme caution when handling batteries.

Keep batteries out of the reach of children.

Battery Maintenance

The battery is filled with battery acid and then sealed 



battery requires some maintenance to ensure its

proper life cycle.

Spray the terminals and exposed wire with a battery 

terminal sealer, or coat the terminals with a thin coat of

grease or petroleum jelly, to protect against corrosion.

Always keep the battery cables and terminals clean and 

free of corrosion.



electrolyte when tipped.

WARNING!: 

and may emit explosive gases. Use extreme

caution when handling batteries. Keep

batteries out of the reach of children.

Tire Maintenance

Check the tire air pressure after every 50 hours of

operation or weekly. Keep the tires inflated to the

recommended pressures. Improper inflation will shorten

the tire service life. See the tire side wall for proper



Do not inflate a tire above the maximum pressure 

shown on the sidewall of the tire.

Do not reinflate a tire that has been run flat or seriously 



and service the tire.

Lubrication

Using a pressure lubricating gun, lubricate the front 

castor wheel axles and the front pivot axle with a No. 2





quality lubricating oil.

Using the Deck Wash System

WARNING!: When using the deck wash

system, never engage the deck from any



tractor. Do not use an assistant or engage deck

in the presence of any bystanders.

Attach the nozzle adapter to a standard garden hose 

connected to a water supply.

Move the tractor to an area within reach of the hose 

where the dispersal of wet grass clippings is not



parking brake, and stop the engine.



the adapter onto one of the deck wash nozzles at either

end of the mower deck. Release the lock collar to lock

the adapter on the nozzle. See Figure 6-3.

Figure 6-3

Turn on the water supply. 







Turn off the water supply. 



disconnect the adapter from the nozzle.

Repeat the previous steps to clean the deck using the 

nozzle at the other end of the deck.

Cleaning the Spindle Pulleys



accumulation of grass clippings from around the spindle

pulleys and V-belt. Clean more often when mowing tall,

dry grass.

Deck Wash

Nozzle

Adapter

Lock Collar

Pull Lock

Collar Back

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

MTD RZT Series Manuel de l'opérateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Tracteur MTD RZT Series