Mtd 217-310-000 Manuel d'utilisateur télécharger pdf (Page 10)

23. Place the depth bar (V) in position on the tailpiece.

Secure with clevis pin (E) and hairpin cotter (F).

------

See figure 19.

Hairp n

Cotter (F)

, 0 / Clevis Pir

0 / (E)

FIGURE 19.

OPERATION

GAS AND OIL FILL-UP

Service the engine with gasoline and oil as instructed

in the separate engine manual packed with yout tiller.

Read instructions carefully.

NOTE

Your tiller is shipped without oil; how

ever, a small amount of oil may be

present from the factory.

TO START ENGINE

WARNING

BE SURE NO ONE IS STANDING IN

FRONT OF THE TILLER WHILE THE

ENGINE IS RUNNING OR BEING

STARTED.

1. Attach spark plug wire to spark plug.

2. Move the throttle control lever forward to i-AST

position. See figure 20.

3. Move choke lever to CHOKE position. See figure

21. After the engine starts, gradually push the

choke lever off.

NOTE

A warm engine may not require

choking.

4. Stand at side of the tiller, grasp the starter handle

and pull out rapidly. Return it slowly to the engine.

Repeat if necessary.

FIGURE 21.

TO STOP ENGINE

Move throttle control lever to STOP position. See figure

20.

TO ENGAGE TINES

To engage the tines, squeeze the clutch grip. To stop

the tines, release the clutch grip. See figure 20.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Mtd 217-310-000 Manuel d'utilisateur Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel de jardinage Mtd 217-310-000