Mtd YM90 Manuel d'utilisateur Page 9
- Page / 82
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
9
Install the cutting attachment shield when using the unit
as a grass trimmer
Install the cutting attachment shield on the shield mount by
inserting the three (3) screws into the shield mount. Tighten
securely with a flat blade screwdriver. See Figure 7.
Remove the Cutting Attachment & Install
the Cutting Blade
NOTE: To make cutting blade removal and installation easier,
place the unit on the ground or on a work bench
.
Remove the Cutting Attachment Shield
See Remove and Install the Cutting Attachment Shield.
Remove the Cutting Attachment
1. Align the shaft bushing hole with the locking rod slot
and insert the locking rod into the shaft bushing hole.
See Figure 8.
(3) Screws
Cutting
Attachment
Shield
Shield Mount
Gear Housing
Cutting Attachment
Locking Rod
Slot
Locking Rod
Shaft Bushing Hole
Locking Rod Slot
Output Shaft
Bushing
Locking Rod
Output Shaft
2. Hold the locking rod in place by grasping it next to
the boom of the unit. See Figure 9.
3. While holding the locking rod, remove the cutting
attachment by turning it clockwise off of the output shaft.
See Figure 10.
Store the cutting attachment for future use.
NOTE: The blade retainer under the cutting attachment
will be used when installing the cutting blade.
Install the Cutting Blade
4. Place the cutting blade on the output shaft bushing.
See Figure 11.
Shield
Mount
Locking Rod
Cutting
Blade
Blade Retainer
Nut
Output Shaft
Bushing
Pilot Hole
SECTION 3: ASSEMBLY INSTRUCTIONS
WARNING: To avoid serious personal
injury, the cutting attachment shield MUST
be in place at all times while operating the
unit as a grass trimmer.
WARNING: The gear housing gets hot with
use. It can result in injury to the operator.
The housing remains hot for a short time
even after the unit is turned off. Do not
touch the gear housing until it has cooled.
WARNING:
To avoid serious personal
injury, always wear gloves while handling or
installing the blade.
Figure 10
Figure 9
Figure 8
Figure 7
Figure 11
- Operator’s Manual 1
- While Operating 4
- Other Safety Warnings 5
- SECTION 2: KNOW YOUR UNIT 7
- Install the Harness 8
- Install the Cutting Blade 9
- Remove the Cutting Attachment 9
- Cutting Attachment 10
- Stopping Instructions 12
- Starting Instructions 12
- CAUTION: 13
- Holding the Trimmer 14
- Decorative Trimming 15
- Using the Cutting Blade 15
- Line Installation 16
- Maintenance Schedule 16
- Single Line Installation 17
- SplitLine™ Installation 17
- Air Filter Maintenance 18
- Installing a Pre Wound Reel 18
- Replacement Parts 18
- Spark Arrestor Maintenance 19
- Replacing the Spark Plug 20
- Carburetor Adjustment 20
- Accessories/Replacement Parts 21
- Long Term Storage 21
- Cleaning 21
- Transporting 21
- SECTION 9: SPECIFICATIONS 23
- SECTION 9: NOTES 24
- P.O. Box 361131 26
- Cleveland, OH 44136-0019 26
- Manuel de l'utilisateur 27
- TABLE DES MATIÈRES 28
- TROUVER LE NUMÉRO DE MODÈLE 28
- SERVICE TECHNIQUE 28
- VISITEZ NOTRE SITE WEB 28
- LIRE TOUTES LES INSTRUCTIONS 29
- Avant L'utilisation 29
- Désherbeuses À Essence 30
- Aprés L'Utilisation 31
- APPLICATIONS 33
- INSTALLER LE HARNAIS 34
- D'ACCESSOIRE DE COUPE 34
- LA LAME DE COUPE 35
- L'ACCESSOIRE DE COUPE 36
- INSTRUCTIONS D'ARRÊT 38
- FONCTIONNEMENT DU EZ-Link 39
- TENUE DE LA DÉSHERBEUSE 40
- RÉGLAGE DE LA LONGUEUR DU FIL 40
- CONSEILS POUR BIEN DÉSHERBER 40
- COUPE DÉCORATIVE 41
- PROGRAMME D'ENTRETIEN 42
- INSTALLATION DU FIL 42
- Installation du fil simple 43
- Installation du SplitLine 43
- ENTRETIEN DU FILTRE À AIR 44
- ENTRETIEN DU PARE-ÉTINCELLES 45
- REMPLACEMENT DE LA BOUGIE 46
- RÉGLAGE DU CARBURATEUR 46
- NETTOYAGE 47
- ENTREPOSAGE 47
- ENTREPOSAGE DE LONGUE DURÉE 47
- TRANSPORT 47
- SECTION 9: CARACTERISTIQUES 49
- SECTION 9: REMARQUES 50
- Garantie du fabricant 51
- Manuel del Dueño/Operador 53
- PARACHISPAS 55
- ¡ADVERTENCIA! 55
- California 55
- ADVERTENCIA 55
- Durante la Operacion 56
- Despues del Uso 57
- APLICACIONES 59
- Instalación 60
- ACCESORIO DE CORTE 61
- INSTALACIÓN DEL ARNÉS 61
- COMBUSTIBLE 64
- INSTRUCCIONES DE APAGADO 65
- INSTRUCCIONES DE ARRANQUE 65
- COMO SOSTENER EL RECORTADOR 67
- RESULTADOS AL RECORTAR 67
- RECORTE DECORATIVO 68
- USO DE LA CUCHILLA DE CORTE 68
- PROGRAMA DE MANTENIMIENTO 69
- INSTALACIÓN DE UN CARRETE 71
- PREBOBINADO 71
- Limpieza del Filtro de Aire 71
- MANTENIMIENTO DEL PARACHISPAS 72
- AJUSTE DEL CARBURADOR 73
- LIMPIEZA 74
- ALMACENAMIENTO 74
- ALMACENAMIENTO PROLONGADO 74
- ACCESORIOS/PIEZAS DE REPUESTO 74
- TRANSPORTE 74
- SECCIÓN 9: ESPECIFICACIONES 76
- Item Part No. Description 80
- Part No. Description 80
- Optional Accessories 81
Produits connexes et manuels pour Matériel de jardinage Mtd YM90
(2 pages)
(64 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.318 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels